advancement in arc welding
Latest News
 advancement in arc welding
Latest News
Home    >   Latest News
2023/12
Regarding the initial sales launch of Coolant circulation device [WS1700]
Features- Easy Use with simple structure- High performance for its low price- Equipped with flow meter switch- Good heat dissipation and cooling performance with large radiatorPlease contact our sales for more details.
2023/12
Updated General Catalog
Newly updated catalog covers standard Tokin products.Please contact our sales for more details.
2023/11
Regarding the initial sales launch of [TG] Contact tip
It could be said that it has a kind of highest durability in Tokin Contact tip.N TG Contact Tip 1.2mm (18152A-12)D TG Contact Tip 1.2mm (18153A-12)(As of now, limited to only 1.2mm wire size.)
2023/07
No Longer Sale for Gas Checker (BM 3860 & MG)
We apologize to tell but some materials are difficult to be obtained. Next model is to be advised. We appreciate your understanding.
2020/10
New Product Special Coating High Durability Tip「EG Tip」Regarding the Initial Sales Launch
In reponse to changing times and changes in welding methods we\'re continuing to diversify our consumable tip offerings. This newly developed tip realized overwhelming performance in spatter limiting methods such as Yaskawa EAGL where the wire is fed forward and backward in sync with the welding waveform. 10 Times the Performance Durability of Conventional Tips In pursuit of a long operating life the EG tip coating thickness and bore hole size were strictly selected. This will further cost reduction for our end users. For sales inquiries please contact your local representative.https://www.tokinarc.com/about/06_index.htmlClick here to download the product catalog.https://www.tokinarc.com/pdf/egtip_202011.pdf
2020/08
Regarding the initial sales launch of the Nozzle Cleaning Station [TKR Series]
More than 10 years have passed since the first nozzle cleaning station was launched and various models have been developed to meet end user needs. This new model was developed to revise the design concept and respond to welding in the mid-current range for automobile manufacturers and similar. TKS-RCA direct signal connection to the control panel allows for reliable stable command. The RC has two options for input power source, either a 24V or 100V.TKS-RSThis model is equipped with an internal proximity sensor that detects when the nozzle is getting close and automatically activates. Only robot teaching is required for operation.Size: L327 x W255 x H904Applicable Nozzle I.D. φ12, 13, 16, 19 mmFor sales inquiries please contact your local representative.https://www.tokinarc.com/about/06_index.htmlClick here to download the product catalog.https://www.tokinarc.com/pdf/tks-r_202006.pdf
2019/10
New Product Launch, Smart-Glide [Roller-Type Flexible Conduit]
2019/10/17 New Product Launch, Smart-Glide [Roller-Type Flexible Conduit]Easy-Glide, a pioneer in roller-type flexible conduit was first launched 9 years ago and still receives widespread praise. After infusing the accrued knowledge from Easy-Glide and the practical end user feedback we further developed and are proud to launch our newest model Smart-Glide.This conduit was carefully designed to reduces wire feeding instability and other issues common in production lines.Optimal for the following welding conditions.・If the equipment layout is tight and requires several curves in the conduit. ・If the wire path is long and wire changing is a demand on time. ・If wire changing is often required due to reoccurring sediment buildup. Applicable Wire Diameter Φ0.9~Φ1.6Minimum Diameter for 360-Degree Bend: 0.4 meters (approx. 16” USC)Although the use of conventional flex-conduits in the above conditions often results in poor wire feeding, roller-type by nature reduces friction and therefore can ensure a stable wire feeding path. Click here to download the product catalog.https://www.tokinarc.com/pdf/sg_202001.pdfFor sales inquiries please contact the below departments by region. Overseas Trade Department (Excluding U.S.A. and Canada)TEL +81-53-485-5555 | E-mail: trading@tokinarc.co.jphttps://www.tokinarc.com/about/06_index.htmlTokin America Corporation (U.S.A and Canada)9844 Windisch Rd., West Chester, OH 45069TEL +1-513-644-9745 | +81-80-8256-2675E-mail: ynagae@tokinamerica.com| info@tokinamerica.com
2019/04
Announcing New Product Handy Tip Changer
We have begun overseas sales of the new Handy Tip Changer.The Handy Tip Changer allows for fast attaching and detaching of tips with the nozzle still in place.Notable Features:・Tip replacement is made possible even without removing the nozzle.・Tips are installed with the proper torque every time keeping torque management easy.・Compatible with all 6.35mm (1/4 inch) torque drivers on the market.Easy one page Japanese/English circular available for download at the below link. https://www.tokinarc.com/pdf/2019catalog021.pdfFor more information, please contact the Overseas Trading Dept.https://www.tokinarc.com/about/06_index.html
2019/03
Announcing New Product Semi-Automatic Torch Series TH
The TH series is a high duty cycle torch developed with the aim of reducing user fatigue. The following three countermeasures were taken.①:An improved ergonomic handle provides a comfortable natural grip. ②:The switch lever area is expanded to allow for switch-timing control. ③:A universal joint cable connection reduces stress on the user’s wrist. For more information, please contact the Oversea Trade Dept.http://www.tokinarc.co.jp/english/about/06_index.html
2019/03
Announcing New Product BM3860 Mass Flow Meter
We have begun overseas sales of the new BM3860 Mass Flow Meter.The BM3860 is a portable mass flow meter designed to measure gas flow directly from the torch nozzle. It is battery powered and capable of approximately 24 hours of continuous use. Shielding gas loss differs depending on the torch shape, cable length, and other factors. Since the BM3860 measures directly from the nozzle end it allows for shielding gas management regardless of torch specifications. No matter what your welding operation is the BM3860 can help you maintain quality control.6 Compatible Gas MixturesArgon・CO2・Argon 90%/CO2 10%・Argon 80%/CO2 20%・Argon 70%/CO2 30%・Argon 60%/CO2 40%Catalog Download http://www.tokinarc.co.jp/english/pdf/2019catalog21.pdf
2017/01
No Longer Sale for Tungsten Grinder II & III
Regarding Tungsten Grinder II & III which had a good reputation, we apologize to tell but this product will be no longer sale after the end of last December, 2016, because parts are difficult to be obtained.Kindly Note that related Consumable products are still available, from Diamondground Products.Please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2015/12
Tokin America Corporation update
We are pleased to let you know that new subsidiary, "Tokin America Coporation", which started from this June, has been enjoying favorable growth, thanks to everyone.We are also honored to announce that Japanese staff will be resident from next February, 2016.With cooperation between Local staff and representitive staff from Japan, we are sure that we can provide generous support to customer both from Japan-side and Americas-side.We appreciate continued support and patronage of our valued customers.Compnay name: TOKIN AMERICA CORPORATIONAddress: 9844, Windisch Rd, West Chester, OH 45069Tel: +1-513-644-9743 FAX: +1-513-444-9749E-Mail info@tokinamerica.comLocation of Tokin America: https://goo.gl/maps/ikfdE *For more inquiry:http://www.tokinarc.co.jp/english/contact/index.php
2015/09
Tokin America Subsidiary Started Full Operation
Tokin America Subsidiary, wholly owned by Tokin Corporation in Japan, set its office at suburbs in Cincinatti, Ohio, and started its full operation.Tokin America can now provide sales-services such as quick delivery and generous support toward customers such as Japanese automobile manufacturers and System integrators located at USA, Canada, Mexico, Brazil, Argentina, and so on, who have been patronizing of Tokin for a long time.Warehouse is also establied and has now enough stock items specialized for USA. We are sure that this will surely enables Tokin Amecia Subsidiary to accomplish quick delivery.Moreover, local staff and representitive staff from Japan are trying best to serve customers from Japan and Americas, cooperating with headquarters staff.Thus, we are sure that we can provide generous support to customer both from Japan-side and Americas-side.Staff is also being reinforced in order to expand our service in USA.We appreciate continued support and patronage of our valued customers.Please refer to the below link for its location;https://goo.gl/maps/ikfdE
2015/06
Announcing Tokin Corporation’s New Subsidiary
We are pleased to announce that beginning June 1, 2015, the Tokin America Subsidiary has begun operation for the service for our present and future customers in the Americas.We are committed to providing superior service in the North, Central and South America region. Below is detail; Company Name: TOKIN AMERICA CORPORATION Address: 9844, Windisch Rd, West Chester, OH 45069 TEL: +1-513-644-9743 FAX: +1-513-644-9749 E-Mail: info@tokinamerica.com Please feel free to contact us if you have any inquiries or questions. We appreciate continued support and patronage of our valued customers.
2015/01
Recommended Butt Welder
Here is our recommended products.This product is for butting the head and the end of wire.Features;1)Simple and easy; you can easily butt each wires by switching on2)Variety of use; applicable wire size is from 0.8mm to 1.6mm3)2 kinds of Volt; 100V and 200VYou can also see the movie of this product through the below link;https://www.youtube.com/watch?x-yt-ts=1422327029&v=82SDGSAOgeI&x-yt-cl=84838260Please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/11
New Flexible Conduit Cable is now on Sale
New Flexible Conduit Cable is now on Sale, "PP Flexible Conduit Cable."You can use this New product as the same as "Simple Flexible Conduit Cable."Since this New product is more elasic, it can reduce resistance in feeding wires.Please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/10
No longer sale for Shielding Gas Checker
Regarding Shielding Gas Checker which had a good reputation, we apologize to tell but this product will be no longer sale after the end of this December, 2014, since main parts of this product are difficult to be obtained.As for replacement product, we will let you know once it becomes available in detail.Please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/09
No longer sale for β-600 Series
Please be informed that “WX702” Torch series which can weld under high current are now on sale.Accordingly, regarding “β-600W” Torch Series, which has the same role, being able to weld under high current, is no longer sale.We believe that “WX702S” and “WX702R” Torch Series surely raise your satisfaction, instead of “β-600W” Torch Series.Please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/05
Nozzle Coat 2ℓ now on sale
Anti-spatter solution “Nozzle Coat 2ℓ” is now on sale.Detail;Part Number : 046114Part Name : Nozzle Coat 2ℓCanAfter it dries, it forms anti-spatter film to minimize the amount of spatter that sticks onto the nozzle.For more information, Please feel free to visit the following site.http://www.tokinarc.co.jp/english/goods/7_index.htmlPlease also feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/05
Tip for Long Use Life, “Hi Tip,” now on sale
Newly-developed Material for Long Use Life.N Hi Tip / D Hi TipFeatures*Optimal for Arc Welding.*Maintains high rigidity and conductivity even at high temperatures.*Two sizes of diameters are available for 1.2mm wire size.*Offers longer use life than conventional products, contributing to improve capacity utilization.For more information, please feel free to contact us through the below inquiry link.http://www.tokinarc.co.jp/english/contact/index.php
2014/05
JAPAN INTERNATIONAL WELDING SHOW 2014
We deeply appreciate visiting our booth at JAPAN INTERNATIONAL WELDING SHOW 2014,held on late April, 4/23~4/26, at Tokyo Big Sight.Displayed products;*Water-cooled Robotic Torches Water-cooled Robotic Torches with High Performance can withstand at a high current, WX702R/WX702S These Water-cooled Robotic Torches are in use for welding at high current up until 700A. They have been developed with our technical knowledge. It got favorable notices for combination of Water-cooled Robotic Torches (WX702R) of Tokin Corporation, with Welding Power Source (POWER WAVE S700) of Lioncoln Electric and Robot of MOTOMAN.Robot Peripheral Equipment*Wire Changer Unit Automatic changes between wire and gas can be accomplished by placing 2 Wire Feeders equipped with switching unit onto 1 MOTOMAN Robot and 1 Digital Welder.Others*Hume Extractors WF-130*Water-cooled Circulation Device WR-200TC with Thermo-Chiller Device*Robotic Torches For Motoman 1440 Robot MSA-300R, YMSA-300S, YMSA-308R, YMSA-308S, YMXA-300R, YMXA-300R, YMXA-308R, YMXA-308RFor more information, please feel free to contact us through the below inquiry link;http://www.tokinarc.co.jp/english/contact/index.
2013/07
We would like to say thank you for visiting Tokin\'s booth at exhibitions held in Thailand and China.
We would like to say thank you for visiting Tokin\'s booth at exhibitions held in Thailand and China.Thailand: Automotive Manufacturing 2013Beijing: BeijingEssen Welding & Cutting FairWe express our gratitude for our great success of both exhibitions.Thank you again for visiting and your interests toward our exhibitions.
2013/06
Exhibitions
Automotive Manufacturing 2013June 23, 2013 - June 20, 2013: a holding periodVenue: BITEC Bangkok, ThailandBeijingEssen Welding & Cutting FairJune 21, 2013 - June 18, 2013: a holding periodVenue: China, Shanghai, Shanghai New International Expo center
2013/03
High-grade shock sensor - "YMHS shock sensor" now on sale
Reproducibility is high because of the high rigidity and high accuracy, making it ideal for use in tough environments high strength YMHS shock sensor.The main feature,I can detect the shock of ① from all directions.You can yet ② high rigidity, to mitigate the damage of the robot torch or deformation at the time of the collision in an optimal lost motion.Collision detection for interference ③ things, has become a best sensitivity to protect the robot, it does not interfere with the normal operation of the robot such as high-speed air cut.Reproducibility is high for ④ high rigidity, high-precision, reducing the recovery time of the collision.By changing the clamp part ⑤ torch, torch of different diameters, such as air-cooled water cooling also can be used. (※ 1)By replacing the ⑥ flange, can be used regardless of the model of the robot. (※ 2)※ In the case of using the one made ​​by Tokin torch. (Please contact us if you are using a third-party torch.)※ 2 standard specification will be Yaskawa robot HP / MH series. At the other robot manufacturersOnce, please contact us if you have you use. (It may not be installed if the robot other manufacturers.)Contact us about high-grade shock sensor, by e-mail from the Contact icon in the HP top"Inquiry" or visit, please contact "053-485-5555".
2012/11
A coolant water circulation apparatus is now available to meet popular demand.
Despite its compact body, it achieves superior cooling performance (35 kcal/min).A separate, large-capacity (10L) tank facilitates water replacement.No priming is required, and the feeding and draining hoses can be detached at a touch. This dramatically reduces the workload for water replacement.A simple construction has been adopted to facilitate the cleaning of the tank and the filter, thus simplifying the maintenance work after use.The cooling water circulation apparatus can bring the performance of a water-cooled torch into full play.
2012/10
The "Micro Glide/Easy Glide", which achieves outstanding feeding performance, is now available to meet popular demand.
Here is a next-generation flexible container that has succeeded in minimizing feeding resistance to an extremely low level through the use of rollers in the wire feed path inside the cable.This reduces friction acting on the wire during wire feed, thus reducing damage to the wire surface to a minimum level.As a result, this creates less wire debris and does away with any special maintenance tasks.Easyglide[1] Minimum use diameter - Usable to 200mm[2] It is enclosed in a protective tube, making it very robust. Thus, it can be used in place of an ordinary flexible container.Microglide[1] Minimum use diameter - Usable to 400mm[2] Its outer diameter is a small 26mm. Thus, it can be used optimally in small spaces by incorporating it in a system or running it over a wall surface.For inquiries, click on the "Inquiries" icon located at the top of the page to send us an e-mail, or call +81-53-485-5555.
2012/09
Three types of NozzleCoat liquid, which prevents the adhesion of sputter, is now available to meet popular demand.
Due to the heat generated at the nozzle after welding, the NozzleCoat liquid that prevents the adhesion of sputter on the torch dries quickly.It forms a sputter prevention film on the inner surface of the nozzle, thus minimizing the fusion of sputter on the nozzle.A sample set is available to enable you to easily experience the performance of the NozzleCoat.This product is very popular with our customers because it allows sputters to be removed easily from the nozzle with a minimum amount of effort.